top of page

How to Choose Drainage Pipes and Fittings for Your Project. Choosing drainage pipes and fittings? Learn what to check before ordering, from pipe dimensions and joint types to access

Oct 13
2 min read

Ordering drainage pipe is easier when you have a clear picture of the whole job. A pipe length may be the main item on your list, but the connections, access points and installation details are just as important. Before buying, establish what the drain will carry, where it will run and how it will connect to the existing system.


Identify the system first

Start by confirming whether the work involves foul drainage, surface water drainage or above-ground soil and waste pipework. Products designed for one application should not be assumed suitable for another. Check the product description and installation guidance rather than choosing by colour or appearance.

For a repair, photographs of the existing pipe and its markings can help you identify the system. Include the damaged section, nearby fittings and the connection you need to make.

Confirm dimensions and compatibility

Common underground drainage ranges include 110mm and 160mm pipe, but the correct size depends on the drainage design. Match the specification for the job rather than selecting a diameter because it is familiar.

When joining new pipe to an existing drain, confirm the material and actual connection dimensions. Clay, plastic and other pipe types may need a suitable adaptor. A nominal size alone does not establish that two components will fit together.

Build a complete fittings list

Walk through the proposed route and record each connection. Your list may include couplers, bends, junctions, adaptors, access fittings and end caps, alongside the pipe lengths. Record the required angles and whether components are plain ended or socketed.

Think about future maintenance at the same time. Access should form part of the layout, especially where cleaning or inspection will be needed. Leaving these decisions until the trench is open can interrupt the job and lead to rushed purchases.


 

Check the installation requirements

The pipe system needs suitable bedding, support, jointing and backfill. Follow the chosen manufacturer’s instructions and the project specification; there is no single installation detail that suits every ground condition or depth.

For push-fit systems, check the instructions for preparing cut ends, cleaning seals and using the specified lubricant. Keep components clean before assembly and protect stored pipe from damage.

Prepare your enquiry

A useful enquiry includes the intended application, pipe size and material, quantities, fitting angles and any photographs or drawings. Mark anything you are unsure about rather than guessing.

Contact AndLee Drainage Supplies with your materials list and project details to ask about suitable products and availability. Getting the connections right before ordering helps the work progress smoothly once it starts.

 
 
 

Recent Posts

See All
Top Tips for Choosing Drainage Products Wisely

When it comes to maintaining a healthy and functional property, effective drainage is crucial. Poor drainage can lead to a host of problems, including water damage, mold growth, and structural issues.

 
 

Comments


bottom of page